Materials Technology Research Group (MATTECH) Laboratory

Assoc. Prof. Ratchatee Techapiesancharoenkij

รองศาสตราจารย์ ดร.ราชธีร์ เตชไพศาลเจริญกิจ

Contact Info

Email : fengrct@ku.ac.th
Int. Phone : 2116
Staff ID. : E1620

Academic Background

B.S. Summa Cum Laude (Materials Science and Engineering), Northwestern University, USA
M.S. (Materials Science and Engineering), Massachusetts Institute of Technology, USA
Ph.D. (Structural and Environmental Materials), Massachusetts Institute of Technology, USA

CV Download

Research Interests

MATTECH’s SDGs

Jump to: Research Publications | Research Innovation

Research Publications

Auewattanapun, K., Bermundo, J.P.S., Hanifah, U., Nakajima, H., Limphirat, W., Techapiesancharoenkij, R.*, Uraoka, Y., “Spectroscopic Analysis of Electrical Phenomena and Oxygen Vacancy Generation for Self-Aligned Fully Solution-Processed Oxide Thin-Film Transistors ,” ACS Applied Materials & Interfaces, 16, 60521-60529 (2024).
Pitiphattharabun, S., Auewattanapun, K., Htet,T.L., Thu, M.M., Panomsuwan, G., Techapiesancharoenkij, R., Ohta, J., Jongprateep, O., “Reduced graphene oxide/zinc oxide composite as an electrochemical sensor for acetylcholine detection,” Scientific Reports, 14, 14224 (2024).
Bansiddhi, A., Panomsuwan, G., Hussakan, C., Htet, T.L>, Kandasamy, B., Janbooranapinij, K., Choophun, N., Techapiesancharoenkij, R., Pant, H.R., Ang, W.L., Jongprateep, O., “Ecofriendly 3D Printed TiO2/SiO2/Polymer Scaffolds for Dye Removal,” Topics in Catalysis, 66, 1662 – 1673 (2023).
Thu, M.M., Chaiammart, N., Techapiesancharoenkij, R., Jongprateep, O., Panomsuwan, G., “Post-engineering of solution plasma-derived carbons via thermal air treatment for supercapacitor electrodes with enhanced capacitive performance,” Electrochemistry Communications, 153, 107539 (2023)
Thu M.M., Chaiammart, N. Jongprateep, O., Techapiesancharoenkij, R., Thant, A.A., Saito, N., Panomsuwan, G., “Introducing micropores into carbon nanoparticles synthesized via a solution plasma process by thermal treatment and their charge storage properties insupercapancitors,” RSC Advances, 13, 16136 – 16144 (2023)
Wipataphan, P., Laohawattanajinda, J., Wichean, T.N., Sripianem, W., Techpaiesancharoenkij, R.*, “Photcathodic protection of amorphous nanorod zinc oxide thin-film coatings on stainless steel AISI 304 fbaricated by spray pyrolysis and hydrothermal technique,” Materials Chemistry and Physics, 291, 126714 (2022).
Pitiphattharabun, S., Auewattanapun, K., Sato, N., Janbooranapinij, K., Techapiesancharoenkij, R., Panomsuwan, G., Ohta, J., Jongprateep, O., “Fe-Doped CuO/MWCNT as a sensing material for electrochemical detection of nitrite,” Crystals, 12, 1536 (2022).
Jongprateep, O., Jitanukul, N., Saphongxay, K., Petchareanmongkol, B., Bansiddhi, A., Laobuthee, A., Lertworasirikul, A., Techapiesancharoenkij, R., “Hydroxyapatite coating on an aluminum/bioplastic scaffold for bone tissue engineering,” RSC Advances, 12, 26789 – 26799 (2022).
Thapa, K., Regmi, K.R., Shah, D., Sharma, R.K., Panomsuwan, G., Techapiesancharoenkij, R., Pant, H.R., “Residual solvent-assisted facile deposition of honeycomb-like silver nanoflakes on the surface of electrospun PAN nanofibers,” Chemical Physics Letters, 801, 139724 (2022).
Silakorn, P., Jantrakulchai, N., Wararatkul, N., Wanwilairat, S., Kangkachit,T., Techapiesancharoenkij, R., Rakthanmanon, T., Hanlumyuang, Y., “Top-of-line corrosion via physics guided machine learning: A methodology integrating field data with theoretical models,” Journal of Petroleum Science and Engineering, 215, 110558 (2022).
Panomsuwan, G., Hussakan, C., Kaewtrakulchai, N., Techapiesancharoenkij, R., Serizawa, Ai, Ishizaki, T., Eiad-Ua, A., “Nitrogen-doped carbon derived from horse manure biomass as a catalyst for the oxygen reduction reaction,” RSC Advances, 12, 17481 – 17489 (2022).
Oo., N.B., Wipataphan, P., Panomsuwan, G., Pewnim, N., Jongprateep, O., Techapiesancharoenkij, R.*, “Effect of substrate and spin-coating parameters on structures of ZnO nanorod and PVDF film,” Suranaree Journal of Science and Technology, 29, 030084 (2022).
Oo., N.B., Wipataphan, P., Na Wichean, T., Panomsuwan, G., Pewnim, N., Jongprateep, O., Techapiesancharoenkij, R.*, “ Fabrication, structural, and piezoelectric force microscopy analyses of nanorod ZnO-PVDF thin films,” Materials Today: Proceedings, 65, 2421-2425 (2022).
Dedruktip, N., Panjatewakub, P., Lupponglung, V., Na Wichean, T., Matan, K., Techapiesancharoenkij, R.*, “Performance comparison of Ga and Ga/La alloy layered active magnetic regeneration beds in a rotary magnetic refrigeration prototype,” Materials Today: Proceedings, 65, 2340 – 2346 (2022).
Sridharan, M., Maiyalagan, T., Panomsuwan, G., Techapiesancharoenkij, R., “Enhanced electrocatalytic activity of cobalt-doped ceria embedded on nitrogen, sulfur-doped embedded on nitrogen, sulfur-doped reduced graphen oxide as an electrocatalyst for oxygen reduction reaction,” Catalysts, 12, 6 (2022)
Wipataphan, P., Sripianem, W., Oo, N.B., Na Wichean, T., Dachbumroong, B., Jongprateep, O., Panomsuwan, G., Pewnim, N., Techapiesancharoenkij, R*., “Photoelectrochemical cathodic protection of amorphous zinc oxide coating on hot rolled steel SS400 in a 3 wt% NaCl solution and a Na2S-NaOH solution,” Journal of Metals, Materials and Minerals, 31, 129 – 142 (2021)
Meesombad, K., Sato, N., Pitiphattharabun, S., Panomsuwan, G., Techapiesancharoenkij, R., Surawathanawises, K., Wongchoosuk, C., Boonsalee, S., Pee, J.H., Jongprateep, O., “Zn-doped TiO₂ nanoparticles for glutamate sensors,” Ceramic International, 47, 21099-21107 (2021)
Chevpruk, T., Chomcharoen, N., Techapiesancharoenkij, R., Muangnapoh, T., Surawathanawises, K., “Solution-based Ni-Al₂O₃ Solar Selective Coating using Convective Deposition,” Materials Today: Proceedings, 23 745 – 751 (2020).
Lupponglung, V., Kanluang, T., Panjatawakup, P., Hanlamyuang, Y., Matan, K., Techapiesancharoenkij, R.*, “Design and development of rotary magnetic refrigeration prototype with active magnetic regeneration system,” Journal of Physics: Conference Series, 1380, 012114 (2019).
Thongjamroon, J., Techapiesancharoenkij, R., Chaiworapuek, W., “Numerical investigation of effect of central gap’s width and length of magnetic material on heat transfer and pressure loss of water flow using computational fluid dynamics,” Journal of Physics: Conference Series, 1380, 012097 (2019).
Yaemphutchong, S., Tulyaprawat, J., Techapiesancharoenkij, R., Hanlumyuang, Y., “The geometric effects of one-dimensional magnetocaloric beds to the efficiency of an active magnetic regenerator: a numerical study,” Journal of Physics: Conference Series, 1380, 012137 (2019).
Munprom, R., Sae-Tiaw, C., Phiankoh, S., Jongprateep, O., Surawathanawises, K., Techapiesancharoenkij, R., “Structural, optical, and electrical modification of hydrothermally grown ZnO nanorods by tin-doping,” Materials Research Express, 6, 095916 (2019).
Jongprateep, O., Sato, N., Techapiesancharoenkij, R., Surawathanawises, K., Siwayaprahm, P., Watthanarat, P., “Photocatalytic and antimicrobial activities of SrxCa(1-x)TiO3 (x=0, 0.25, 0.5, 0.75 and 1) powders synthesized by solution combustion technique,” Journal of Metals, Materials and Minerals, 29, 42 – 47 (2019).
Jongprateep, O., Sato, N., Techapiesancharoenkij, R., Surawathanawises, K., “Electrocatalytic Properties of Calcium Titanate, Strongtium Titanate, and Strontium Calcium Titanate Powders Synthesized by Solution Combustion Technique,” Advances in Materials Science and Engineering, 2019, 1612456 (2019).
Jongprateep, O., Meesombad, K., Techapiesancharoenkij, R., Surawathanawises, K., Siwayaprahm, P., Watthanarat, P., “Influences of chemical composition, microstructure and bandgap energy on photocatalytic and antimicrobial activities of ZnO and Ag-doped ZnO by solution combustion technique,” Journal of Metals, Materials and Minerals, 29, 78 – 85 (2019).
Worapot Sripianem, Ratchatee Techapiesancharoenkij*, “Effect of Al and Ga codoping on the morphological, electronic, and optical properties of ZnO transparent conductive thin films prepared by spray pyrolysis technique,” Turkish Journal of Physics, 42, 688-698 (2018).
Kanluang, T., Hanlumyuang, Y., Techapiesancharoenkij, R.*, “Design and development of magnetic refrigeration prototype for the performance analysis of magnetocaloric materials,” Journal of Physics: Conference Series, 1144, 012065 (2018).
Masaen, K., Sanglao, J., Chimsiri, P., Techapiesancharoenkij, R., Pussadee, N., “A Particle Detection Modeling of Non-contact Coplanar Differential Impedance Sensor in Microfluidic System,” Journal of Physics: Conference Series, 1144, 012180 (2018).
Chimsiri, P., Masane, K., Sanglao, J., Techapiesancharoenkij, R., Pussadee, N., “A Study of Carteria sp. Cell Electrical Lysis in Straight and Tapered Microfluidic Systems,” Journal of Physics: Conference Series, 1144, 012120 (2018).
Tekacharin, P., Chobaomsup, V., Kamchaddaskorn, A., Jongprateep, O., Saisriyoot, M., Surawathanawises, K., Boonyongmaneerat, Y., Techapiesancharoenkij, R.*,”Clucose sensing characterization of non-enzymatic nickel film and electrodes in sodium hydroxide solution,” Journal of Physics: Conference Series, 1144, 012084 (2018).
Jongprateep, O.; Meesombad, K.; Techapiesancharoenkij, R.; Surawathanawises, K., “Chemical Composition, Microstructure, Bandgap Energy and Electrocatalytic Activities of TiO₂ and Ag-doped TiO₂ Powder Synthesized by Solution Combustion Technique,” Ceramics International, 44, S228-S232 (2018).
Jongprateep, O., Meesombad, K., Techapiesancharoenkij, R., Surawathanawises, K., Munprom, R., “Effect of Sn concentration on chemical composition, microstructure and photocatalytic activity of nanoparticulate Sn-doped TiO2 powders synthesized by solution combustion technique,” Key Engineering Materials, 766, 191 – 196 (2018)
Ratchatee Techapiesancharoenkij*, Worapot Sripianem, Kamonchanok Tongpul, Chanakorn Peamjharean, Thanate Na Wichean, Thanawat Meesak, Pitak Eiamchai, “Investigation of the photocathodic protection of a transparent ZnO coating on an AISI type 304 stainless steel in a 3% NaCl solution,” Surface and Coatings Technology, 320, 97-102 (2017)
Panaaek Athichalinthorn, Jidsucha Darayen, Wachira Puttichaem, Ratchatee Techapiesancharoenkij, Boonrat Lohwongwatana, “The Thermal-Aging Effect on the Microstructure Evolution and Shear Strength of the Sn-Rich Au-Sn Soldering between AlTiC and Si Substrate in Microelectronics,” Key Engineering Materials, 751, 3 – 8 (2017).
Jidsucha Darayen, Panaaek Athichalinthorn, Ratchatee Techapiesancharoenkij, Sasawat Mahabunphachai, Chedtha Puncreobutr, Gobboon Lothongkum, Boonrat Lohwongwatana, “Microstructural and Diffusion Analysis of Au-Sn Diffusion Couple Layer Undergoing Heat Treatment at Near Eutectic Temperatures,” Engineering Journal, 21, 245 – 253 (2017).
Makarawat Boonterm, Surakarn Sunyadeth, Suchada Dedpakdee, Panaake Athichalinthorn, Somjate Patcharaphun, Rattanawan Mungkung, Ratchatee Techapiesancharoenkij*, “Characterization and comparison of cellulose fiber extraction from rice straw by chemical treatment and thermal steam explosion,” Journal of Cleaner Production, 134, 592-599 (2016).
Pathompong Janethaisong, Yuttanant Boonyongmaneerat, Ratchatee Techapiesancharoenkij*, “Pulsed-current electrochemical codeposition and heat treatment of Ti-dispersed Ni-matrix layer,” Metallurgical and Materials Transactions B, 47, 2222-2228 (2016).
Surakan Sunyadeth, Pun Wirot, Boonrat Lohwongwatana, Ratchatee Techapiesancharoenkij*, “The alloying and aging effects on the wettability and intermetallic bonding of the Sn-Zn-Cu-Bi soldering alloy on a Cu substrate,” Materials Science Forum, 857, 26 – 30 (2016).
Weerawat Terdthaichairat, Ratchatee Techapiesancharoenkij, Apirat Laobuthee, Supamas Danwittayakul, Sittha Sukkasi, “Material Safety and Integrity of Water-Filled Low Density Polyethylene Bags in an Accelerated Weathering Investigation for Applications in Solar Water Disinfection (SODIS),” Key Engineering Materials, 659, 269 – 273 (2015).
Weerawat Terdthaichairat, Payoon Senthongkaew, Ratchatee Techapiesancharoenkij*, “Effect of Copper and Zinc on Microstructures, Melting Points and Corrosion Resistance of Sn-Zn-Cu-Bi Soldering Alloys,” Key Engineering Materials, 658, 59 – 63 (2015).
Sangthum Srikomol, Pathompong Janetaisong, Yuttanant Boonyongmaneerat, Ratchatee Techapiesancharoenkij*, “Morphology and Hardness of Electrochemically-Codeposited Ti-Dispersed Ni-Matrix Composite Coatings,” Archives of Metallurgy and Materials. 59, 4, 1287 – 1292 (2014).
Nattida Klinklow, Sethayuth Padungkul, Supoj Kanthong, Somjate Patcharaphun, Ratchatee Techapiesancharoenkij*, “Development of a Kraft Paper Box Lined with Thermal-Insulating Materials by Utilizing Natural Wastes,” Key Engineering Materials. 545, 82 – 88 (2013).
Sangthum Srikomol, Yuttanant Boonyongmaneerat, Ratchatee Techapiesancharoenkij*, “Electrochemical codeposition and heat treatment of nickel-titanium alloy layers,” Metallurgical and Materials Transactions B. 44. 53 – 62 (2013).
J. Wang, C. Jiang, R. Techapiesancharoenkij, D. Bono, S.M. Allen, R.C. O’Handley, “Microstructure and magnetic properties of melt spinning Ni-Mn-Ga,” Intermetallics. 32, 151 – 155 (2013).

Ratchatee Techapiesancharoenkij*, Jari Kostamo, Samuel M. Allen, Robert C. O’Handley, “The effect of magnetic stress and stiffness modulus on resonant characteristics of Ni-Mn-Ga ferromagnetic shape memory alloy actuators,” Journal of Magnetism and Magnetic Materials. 323, 3109 – 3116 (2011).
Manickam Mahendran, Jorge Feuchtwanger, Ratchatee Techapiesancharoenkij, David Bono, Robert C. O’Handley, “Acoustic energy absorption in Ni-Mn-Ga/polymer composites,” Journal of Magnetism and Magnetic Materials. 323. 1098-1100 (2011).
Jingmin Wang, Chengbao Jiang, Ratchatee Techapiesancharoenkij, David Bono, Samuel M. Allen and Robert C. O’Handley, “Anomalous magnetizations in melt-spinning Ni–Mn–Ga,” J. Appl. Phys. 106, 023923 (2009).
Ratchatee Techapiesancharoenkij*, Jari Kostamo, Samuel M. Allen and R.C. O’Handley, “Frequency response of acoustic-assisted Ni-Mn-Ga ferromagnetic shape-memory-alloy actuator,” J. Appl. Phys. 105, 093923 (2009).
Uwe Gaitzsch, Ratchatee Techapiesancharoenkij, Martin Potschke, Stefan Roth, and Ludwig Schultz, “Acoustic Assisted Magnetic Field Induced Strain in 5M Ni-Mn-Ga Polycrystals,” IEEE Transactions on Magnetics, 45, pp. 1919-1921 (2009).
Ratchatee Techapiesancharoenkij*, Jesse Simon, David Bono, Samuel M. Allen and R.C. O’Handley, “Acoustic-assist effect on threshold field and twinning-yield stress of Ni–Mn–Ga single crystals,” J. Appl. Phys. 104, 033907 (2008).
Ratchatee Techapiesancharoenkij*, Samuel M. Allen and Robert C. O’Handley, “Acoustic-assisted, magnetic-field-induced actuation of Ni-Mn-Ga single crystals,” Materials Science Forum 583, pp. 147-168 (2008).
Ratchatee Techapiesancharoenkij*, Jari Kostamo, Jesse Simon, David Bono, Samuel Allen and Robert C. O’Handley, “Acoustic-assisted, magnetic-field-indcued strain of Ni-Mn-Ga single crystal,” Appl. Phys. Lett. 92, 032506 (2008).
R.C. O’Handley, D.I. Paul, S.M. Allen, M.L. Richard, J. Feutchwanger, B.W. Peterson, R. Techapiesancharoenkij, M. Barandiaran, P. Lazpita, “Model for temperature dependence of field-induced strain in ferromagnetic shape memory alloys,” Materials Science and Engineering A 438-440, pp.445-449 (2006).
M.A. Marioni, R.C. O’Handley, S.M. Hall, D.I. Paul, M.L. Richard, J. Feutchwanger, B.W. Peterson, J.M. Chambers, R. Techapiesancharoenkij, “The ferromagnetic shape-memory effect in Ni–Mn–Ga,” Journal of Magnetism and Magnetic Materials 290, 1, pp. 35-41 (2005).

Research Innovation

1) “Thermite composition for a process of plugging and abandoning a petroleum well and process of plugging and abandoning a petroleum well using said thermite composition” Patent WO2024028820A1, Application Date 04/08/2023, Publication Date 08/02/2024 (Classification E21B33/13).

2) “A method and system for predicting pipeline corrosion” Patent US20230034897A1, Application Date 27/12/2019, Publication Date 02/02/2023 (Classification F17D5/00).

3) “Thermocouple for temperature measurement under microwave radiation” TH Petty Patent Grant # 17465, TH 2003000816, Application Date 17/04/2563, Grant Date 16/03/2564 (IPC Classification G01K 5/00, G05D 23/22, H01L 35/32).

4) “Bio-degradable plastic surgery clip” TH Petty Patent Grant # 22518, TH 2203000131, Application Date 19/01/2565, Grant Date 21/09/2566 (IPC Classification A61B 17/00).

5) “Microwave heating for metals sintering” TH Petty Patent Grant # 24173, TH2003001554, Application Date 08/07/2563, Grant Date 31/07/2567 (IPC Classifications : F23G 5/00, F27B 3/00).

6) Sterling Silver Clay

7) Magnetic Refrigeration Prototype (MR)

7.1) MR Prototype Phase I

7.2) MR Prototype Phase II

8) Smart Glass Fiber Reinforced Polymer (GFRP) Pole

Jump to: Research Team Members | Research Team Alumni

Research Team Members

Prasertsit Panjatewakup

Thai, Research assistant, M.E., Kasetsart University, Thailand

Soravid Veerapong

Thai, M.E. Student

Htet Yadanar Soe

Myanmar, Ph.D. Student

Thae Su Win (Amelia)

Myanmar, Ph.D. Student

Krittin Auewattanapun

Thai, NAIST-KU Double Degree Master Student

Sanpet Petcharuk

Thai, M.E. Student

Konkanok Chaimongkol

Thai, M.E. Student

Rawinan Sangkhaw

Thai, M.E. Student

Unchalee Jaksang

Thai, 4+1 B.E./M.E. Student

Nattha Jornnoo

Thai, 4+1 B.E./M.E. Student

Nonthapat Peanpak

Thai, B.E. Student

Sirapop Krataytong

Thai, B.E. Student

Pawekorn Charoensri

Thai, B.E. Student

Nutchnon Changyoung

Thai, B.E. Student

Research Team Alumni

Worapot Sripianem

Thai, B.E., M.E.

Phasut Bunkhanphol

Thai, B.E., M.E., Pandora

Vichagorn Lupponglung

Thai, B.E., M.E., H Lab

Nattapol Dedruktip

Thai, M.E.

Phatchara Wiphatapan

Thai, B.E., M.E., Current Ph.D. Candidate at VISTEC, Thailand

Weerawat Terdthaichairat

Thai, B.E., M.E., PTTGC

Makarawat Boonterm

Thai, M.E., PTT

Surakarn Sunyadeth

Thai, M.E.

Sangthum Srikomol

Thai, M.E., POSCO-Thainox

Pathompong Janetaisong

Thai, M.E., ENTEC

Panaaek Athichalinthorn

Thai, B.E., M.E.

Dr. Chaiyanan Kulchaisit

Thai, B.E., Master and Doctoral Degrees from NAIST, Japan, Current Semiconductor Engineer at Micron, Japan

Naw Blessing Oo

Myanmar, M.E., Current Ph.D. Candidate at Nara Institute of Science and Technology, Japan under MEXT Scholarship

Nattida Klinklow

Thai, M.E.

Teetawat Kanluang

Thai, M.E.

Parit Tekacharin

Thai, M.E.

Saranya Wichachai

Thai, M.E.

Trirat Tantayapiruk and Kewalin Khonchalard

Thai, B.E.

Kanokphorn Thaweesuk and Chidchanok Nilwong

Thai, B.E.

Theptat Charoenwiriyapap and Korapin Koonsri

Thai, B.E.

Pratthana Wongjit, Nathaporn Uthaichai, Phawarun Chuangchai

Thai, B.E.

Tawanrung Panchang, Anayos Inopas

Thai, B.E.

Apinya Duongjai

Thai, B.E.

Thamonwan Chairaj

Thai, B.E., Honda R&D Asia Pacific

Donporn Rodkrajub

Thai, B.E.

Kanokwan Suwiwatthana

Thai, B.E.

Jutiapa Laohawattanajinda

Thai, B.E.

Kasidet Thianophat, Surashet Pornsawat, Sillapat Pichayagan

Thai, B.E.

Krittimet Eksinchol, Natapong Neatchalayuth

Thai, B.E.

Kanin Sirichartchai

Thai, B.E., Meticuly

Dr. Nattacha Kulmala

Thai, B.E., Master and Doctoral Degrees from NAIST, Japan

Tonthep Hansirisathit

Thai, B.E.

Siripat Pleanlikit

Thai, B.E.

Panupong Sathambut

Thai, B.E.

Panjapha Pinsook

Thai, B.E., PTT

Rattanan Suwansomboon

Thai, B.E.

Weena Phaiwan

Thai, B.E., Asbuilt Solutions B.V., Netherlands

Boonyawee Suesathasit

Thai, B.E., PTTME

Nattharit Buathong

Thai, B.E., NS-SUS Steel

Chanikarn Utakaphan

Thai, B.E., NS-SUS Stee

Pitcha Kiatthanabumrung, Alichapat Chuchuay

Thai, B.E.

Thit Sriboonruang, Anan Obormkul

Thai, B.E.

Warittha Pattanasate, Supitcha Khanpet

Thai, B.E.

Kamonchanok Tongpul

Thai, B.E., NSK Asia Pacific Technology Centre (Thailand) Co., Ltd.

Chanakorn Piamcharoen

Thai, B.E.

Pradchaya Wattanaphan

Thai, B.E.

Akara Vinitmanon

Thai, B.E.

Deatsit Khemathon

Thai, B.E.

Wanravee Techanonrungrueng

Thai, B.E.

Chockanan Tiyawatwitthaya

Thai, B.E.

Kittiya Nijpakornkul

Thai, B.E.

Sutaphat Fuangkaew

Thai, B.E.

Nattapat Khontha

Thai, B.E.

Ongkarn Bunnag

Thai, B.E.

Pathapong Kokoblarp

Thai, B.E., Covestro (Thailand) Co., Ltd.

Napamas Jaroonvechatam

Thai, B.E., Reckitt Benckiser Healthcare Manufacturing (Thailand) Co., Ltd.

Naruepon Ungkasuwan

Thai, B.E.

Anan Siriboonpipatana

Thai, B.E.

Aumpika Chanthongin

Thai, B.E.

Soravis Limvisitsakul

Thai, B.E.

Walailuck Chutham

Thai, B.E.

Thongchai Saelim

Thai, B.E.

Hatairat Panichnava

Thai, B.E.

Methapa Withana

Thai, B.E.

Thanit Meebupha

Thai, B.E.

Dr. Jatupon Opapaiboon

Thai, B.E., Master and Doctoral Degrees from Chulalongkorn University, Current Faculty Member at Dept of Metallurgical Engineering, Chulalongkorn University

Pun Wirot

Thai, B.E.

Rachata Chuaytookpuen

Thai, B.E.

Tinnapop Cheawkul

Thai, B.E.

Waleerat Taoklum

Thai, B.E.

Araya Treepojanee

Thai, B.E.

Duanghathai Nimrat

Thai, B.E.

Suparkit Jaturapatpaibul

Thai, B.E.

Pimpisut Jutin

Thai, B.E.

Amornrat Pinyosap

Thai, B.E.

Wannisa Pornsaen

Thai, B.E.

Sirirak Phakkeeree

Thai, B.E.

Natharuj Verojpipat

Thai, B.E.

Donthicha Krajangchai

Thai, B.E., MKK Asia Co., Ltd.

Pannapak Punkanokkultorn

Thai, B.E., MAHLE Services (Thailand) Ltd.

Thipakorn Champathong

Thai, B.E.

Nathee Chaibawornwiwat

Thai, B.E.

Jump to: Research Team Awards | Research Team Activities

Research Team Awards

The Packaging and Materials Innovation Symposium 2024 (PMIS 2024)

Silver Presentation Award: Kewalin Khonchalard and Trirat Tantayapiruk “Photocathodic protection of ZnO/ZnS multilayer thin-film coating for stainless steel 304”

The Packaging and Materials Innovation Symposium 2024 (PMIS 2024)

Bronze Presentation Award: Kanokphorn Thaweesuk and Chidchanok Nilwong “Sintering of Copper Clay under Different Environment for Development of Jewelry Processing Technology”

The 6th International Conference on Applied Physics and Materials Applications (ICAPMA2023), Dec 6th – 9th, 2023

Oral Presentation Award : Thae Su Win et al., “Simulation of Photocathodic Corrosion Protection with Metal Oxide Semiconductor using COMSOL Multiphysics Framework”

The Packaging and Materials Innovation Symposium 2023 (PMIS 2023)

Golden Presentation Award : Pratthana Wongjit, Nathaporn Uthaichai, Phawarun Chuangchai, “Engineering Design and Materials Selection for Development of Dog Sterilization Clip using Polymeric Materials”

The Packaging and Materials Innovation Symposium 2023 (PMIS 2023)

Bronze Presentation Award : Theptat Charoenwiriyapap and Korapin Koonsri “Parametric study of 3D Printing of Nylon-Based Composite by Fused Deposition Method”

The Packaging and Materials Innovation Symposium 2022 (PMIS 2022)

Poster Presentation Award : Apinya Duongjai, “Selection of Materials, Engineering Design, Analysis and Prototyping of Dog Sterilization Clip from Biodegradable Plastic”

Kasetsart University Innovation Award 2020

1st Runner-Up Award in Science and Technology, Innovation by Graduate Students: Phasut Bunkhanphol, “High-Temperature Commercial Microwave Furnace”

The 6th Packaging & Materials Innovation Symposium 2019 (PMIS 2019)

Student presentation award : Juthapon Laohawattanajinda, “Preparation of Zinc Oxide Thin Film with Amorphous and Nanorods Structure by Spray Pyrolysis Technique on Stainless Steel AISI 304 for Study of Photocathodic Protection”

The 6th Packaging & Materials Innovation Symposium 2019 (PMIS 2019)

Student presentation award : Kasidet Thianophat, Sillapat Pichayagan, Surashet Pornsawat, “Development of Vibrational Energy Harvesting System using ZnO Nanorods”

Chair of Master of Materials Engineering Program, University Outstanding Academic Program Award for Academic Year 2019, Kasetsart University

(No description available)

Chair of Master of Materials Engineering Program, University Outstanding Academic Program Award for Academic Year 2018, Kasetsart University

(No description available)

The 4th Packaging & Materials Innovation Symposium 2017 (PMIS 2017)

Poster Presentation Award : Boonyawee Suesathasit, Chanikarn Utakaphan, Nattharit Buathong, “Effect of the spray pyrolysis ZnO seed layer, hydrothermal growth time and substrate type on the growth of ZnO nanrods”

The 4th Packaging & Materials Innovation Symposium 2017 (PMIS 2017)

Poster Presentation Award : Panjapha Pinsook, Rattanan Suwansomboon, Weena Phaiwan, “Preparation of Nickel Oxide Thin Films by Spray Pyrolysis Technique on Stainless Steel 304 for Photoelectrochemical Characteristic Investigation”

Kasetsart University Innovation Award 2017

1st Runner-Up Award in Science and Technology, Innovation by Graduate Students: Worapot Sripianem, “Spray Pyrolysis Equipment for Nano Thin Film Coating under Normal Atmosphere”

Academic Textbook Award, “Materials Selection and Design” for the academic year 2017, Faculty of Engineering, Kasetsart University

(No description available)

Outstanding Academic Personnel under 40 (Academic Service in Science and Technology) Year 2016, Kasetsart University

(No description available)

Best Academic Service Project Year 2015 for a project with a budget lower than 1 Million THB, Faculty of Engineering, Kasetsart University

(No description available)

Research Team Activities

SPE/IADC Asia Pacific Drilling Technology Conference and Exhibition (APDT) at Bangkok Convention Center Central World, Aug 7-8th, 2024 : Exhibition of "Thermite Seal" Technology, collaborated between MATTECH + PTTEP + Dept of Metallurgical Engineering, CU

(No description available)

Invited Seminar at Faculty of Engineering, Yuan Ze University, Taoyuan City, Taiwan, April 22nd, 2024 : “The Academics and Industrial Aspect plus Opportunities in Thailand : Materials Engineering”

(No description available)

Invited Talk at 2024 Taiwan-Thailand Symposium on Engineering & Technology (TALENT 2024), May 30th, 2024 : “Photocathodic Corrosion Protection by Semiconductor Nanostructures”

(No description available)

Keynote Speaker, Joint Symposium Nara Institute of Science and Technology, Chulalongkorn University, and Kasetsart University, Aug 24th, 2022 : “Zinc Oxide Thin Films for Corrosion Protection and Energy-Harvesting Applications”

(No description available)

IADC/SPE Asia Pacific Drilling Technology (APDT) Conference and Exhibition, at Conrad Hotel Bangkok, Aug 9-10th, 2022 : Showcase "Thermite for Well Plug & Abandonment" Technology, collaborated between MATTECH + PTTEP + Dept of Metallurgical Engineering, CU

(No description available)

Jump to: Academic Collaborations | Industrial Collaborations

Academic Collaborations

Prof. Yukiharu Uraoka, Information Device Science Laboratory, Nara Institute of Science and Technology (NAIST), Japan
Prof. Jun Ohta, NAIST, Japan
Asst. Prof. Juan Paolo S. Bermundo, Information Device Science Laboratory, NAIST, Japan
Assoc. Prof. Pongthep Prajongtat, Department of Materials Science, Kasetsart University
Assoc. Prof. Chanin Panjapornpon, Department of Chemical Engineering, Kasetsart University
Assoc. Prof. Weerachai Chaiworapuek, Department of Mechanical Engineering, Kasetsart University
Asst. Prof. Attaporn Wisessint, Department of Mechanical Engineering, Kasetsart University
Asst. Prof. Thanawin Rakthammanon, Department of Computer Engineering, Kasetsart University
Assoc. Prof. Siriroj Sirisukpraset, Department of Electrical Engineering, Kasetsart University
Assoc. Prof. Woradorn Wattanapanitch, Department of Electrical Engineering, Kasetsart University
Assco. Prof. Boonrat Lohwongwattana, Department of Metallurgical Engineering, Chulalongkorn University
Asst. Prof. Numpon Insin, Department of Chemistry, Chulalongkorn University
Assoc. Prof. Rojana Pornprasertsuk, Department of Materials Science Chulalongkorn University
Prof. Yuttanant Boonyongmaneerat, Metallurgy and Materials Science Research Institute, Chulalongkorn University
Assoc. Prof. Kittiwit Matan, Department of Physics, Mahidol University
Assoc. Prof. Nonglak Meethong, Department of Physics, Khon Kaen University
Dr. Wanida Pongsaksawad, Smart Manufacutring and Maintenance Technology Research Team, Rail and Modern Transports Research Center, MTEC, National Science and Technology Development Agency (NSTDA), Thailand